 |
Everyone needs some privacy once in a while. If you don't want to be disturbed by the phone, Do Not Disturb redirects your calls to a standard message in English that says you are not available.
|
1. Activating Do Not Disturb - Lift the handset and wait for the dial tone.
- Key # 7 3 0 #
- Wait for the repeated tone, then replace the handset.
2. Cancelling Do Not Disturb - Lift the handset and wait for the dial tone.
- Key # 7 3 1 #
- Wait for the repeated tone, then replace the handset.
Please Note: - To confirm that Do Not Disturb has been programmed, just dial your own number from your phone and you'll hear he recorded message.
- To remind you that Do Not Disturb is activated, there will be a repeated tone when you lift the handset. The tone will last 4 to 5 seconds before you hear the usual dial tone.
- Out going calls can still be made after you have programmed the service. Wait for the dial tone before dialling the required phone number.
- If you have Remote Command and/or Collect Call Screen service, a PIN is inserted immediately after the activation or cancellation code.
Eg for Activation: # 730 PIN YYYYYYYY# where PIN is your 5 digit PIN and YYYYYYYY is your phone number.
Eg for Cancellation: #731 PIN# where PIN is your 5 digit PIN.
|
|
|
|
