Global Roaming iPass

Global Access Points & Charges | How to Roam | Cost of Roaming | FAQs | User Guide

iPassConnect (V3.6) for Windows NEW!

Download
Download	supports Mac OS 8.6 / 9.0 / 9.1.
Download	Support Mac OSX 10.1/10.2/10.3/10.4/10.5 Note: Please click here for instructions on installation. The existing iPassConnect version do not support MacBook Air.

Unique Features

• Available Networks
  iPassConnect can automatically detect local broadband networks and makes it easy for you to connect to them. The Available Networks listing in your Phonebook can display accessible Ethernet, WLAN and Mobile Data networks.
   
• Phonebook Connections
  You can quickly search the Phonebook for access points in your area by geographic vicinity, or by phone number. iPassConnect displays the available access points connection type, so you can choose the one you want to connect to.
   
• Auto-Detection
  If your computer is equipped with the proper hardware, iPassConnect will automatically detect and display Ethernet connections, local WLAN hotspots, and Mobile Data wireless networks. Auto detection is also sometimes referred to as sniffing.
   
• Automatic Update
  iPassConnect will automatically check at periodic intervals to see if there are any software and Phonebook updates available. If so, you may be prompted to download and install the update. You can also choose to defer an update for up to 15 days. At the end of that time, iPassConnect will automatically update.
   
• Bookmarks
  The Bookmarks menu conveniently allows you to save and re-use connection information for the access points you connect to most frequently.
   
• Launching Programs after Connecting
  You can configure iPassConnect to launch other programs automatically after connecting to the iPass network. For example, you can launch your Web browser or other programs, such as your email client, by adding them to the launch list.
   
• Smart Redial
  By using the Smart Redial feature with dial-up connections, iPassConnect will automatically continue dialing all access points within the same city until a successful connection is made.
   
• Busy Number Redial
  This feature, used for dial-up connections, allows you to configure iPassConnect to retry a busy access point if a connection attempt fails. This feature is useful when using a bookmarked access point, or when roaming in areas where there are few access points and heavy Internet traffic.
   
• Wireless Auto-Connect
  If enabled, the Wireless Auto-connect feature enables you to automatically make WLAN connections to a list of preferred wireless access points, without repeatedly signing in. Auto-connect is typically used for a set of hotspots on a local campus where WLAN connectivity is widespread. Users could rove from place to place on the campus and will stay connected through wireless access without repeated logins. When Auto-Connect is enabled for multiple networks, iPassConnect will attempt to connect to access points listed in the Phonebook first, and then any personal networks, in order of signal strength.

System Requirements
Hardware Requirements

• Pentium III processor
• 256 MB RAM
• 100 MB free disk space
• TCP/IP Protocol
• 16-bit color mode
• A properly installed/configured modem
• Dial-up Networking

At least one connectivity device installed, depending on your intended connection type:

• 56K v90/92 modem for a dial-up connection
• WLAN adapter for a WLAN connection
• Ethernet adapter for a Ethernet connection

Operating System Requirements
iPassConnect 3.60 is supported on Microsoft Windows 2000 SP 4 or later, and Windows XP Home or Professional SP 1 or later and Windows Vista 32-bits edition. iPassConnect has also been tested on Windows XP Professional SP 2 and above.

Supported Hardware

Wireless Cards

An 802.11x wireless card is needed for WLAN connections. The table on the following page displays the wireless cards have been successfully tested for connectivity on the iPass network using iPassConnect 3.60.

iPassConnect (V2.39) For Mac OS X

• Support Mac OS X 10.4 (Tiger) or 10.5 (Leopard)
• Run on PowerBook G4, MacBook, MacBook Pro, Mac mini
• 512MB RAM
• 500MB free disk space
• An NDIS v5.1-compliant 802.11b/g Wi-Fi device with appropriate software drivers.
• Ethernet adapter
• 56K v90/v92 modem

Downloads

Download New iPassConnect SingNet_iPC_v360 for Windows

Download New iPassConnect SingNet_MAC_iPC_v18.hqx for Mac OS

A complete list of Global Access Points can be downloaded at iPass Global Access Points Page.